This unit has a useable input range from 12~24VDC, it is also capable of delivering up to 17 Volts to the output. This effectively boosts the 12V load increasing output brightness and range substantially, compatible with any DC loads i.e. Halogen or LED.
– Dimmer adjusts max overall brightness. (effect range changes at lower voltages)
– Smoothing adjusts rise time allowing for a more/less dramatic flicker.
– Speed adjusts the effect rate making it faster or slower.
– 3-Depth trimmers set the distance between effect steps from bright to dim.
While the Flicker DC can supply maximum bursts of 20Amps, the recommended long term useable draw is 15Amps. Remember that the unit gets very hot under normal operating conditions so it must be kept cool & away from other heat sources and flammable materials such as Vinyl, Carpet, Plastic trim, Etc.
A single 1/4”-20 mounting hole is located on the bottom, use our mounting bracket or mount directly to surface (wood recommended) with fans facing upward.
Make sure to use a heavy gauge wire such as #10AWG & avoid long cable runs to decrease voltage drop. You’ll want to check the output voltage once your load is connected.