Professional lighting and effects equipment. Hand made in the USA.
Created 30, April, 1997
Copyright W. McIntire Ent.
NEWEST PRODUCTS
SIX PAK DIMMER
The redesigned SIX PAK is now available. It now has optional DMX capability. Useable as a stand alone and/or DMX dimmer, this marvel is like a mini dimmer rack with 6X20 amp circuits. A whisper fan keeps the unit cool even when installed in an optional Pelican 1450 hard shipping case. The unit is available in 2 configurations, "desktop" with connectors on the rear and "hardcase" with connectors on the top.SHADOWMONSTER
Like a Shadowmaker on steroids! Individual effect select, high & low dimmer set and speed controls for each of the 6 channels. Each of the 6 channels have available some 100 effects!! All channels can also be controlled by channel 1’s speed control. Set all effects the same for a 12K firelight with 6X2K lamps! Or... Use several 2,000 watt channels for a chase, some for a fire and use some as a dimmer only... ALL AT THE SAME TIME! Uses the same NEW 6X2K housing as the Six Pak Dimmer above with rear or top wire entry options. A whisper fan keeps the unit cool.FLIP FLOP LAMP CYCLER
Control up to 2,000 watts of lighting with adjustable time off and time on from just a blink to a maximum 30 second delay. The dual level dimmer allows the effect to take place between a preset high and preset low brightness setting for absolute control. Click here to view the INSTRUCTIONS.
NEW DMX PRODUCTS
Still useable as stand alone lighting control products, the TRIPLE 2K DMX DIMMER, the FLICKER 2 DMX and the PRO DMX DIMMERS have added DMX control capability!DMX INTERFACE
Now you can control our Dimmers and effects devices with DMX! Though it is limited to switching the Interface on or off to the level set at the dimmer, it adds valuable functionality to older Magic Gadgets Dimmers (or any with the Interface connection!).The unit has standard 5 pin XLR DMX input and loop connections and 6 independent Interface outputs. The 6 Interface outputs are sequential from the DMX address setting, i.e. (001) from 001 to 006, (507) from 507 to 512, etc. Has DMX receive, power, and 6 output activity indicators. Click here to view the INSTRUCTIONS.
COSTUME LIGHTING
Chasing, blinking, multi colored, wild and crazy lighting using a cigarette pack sized controller and LED lights. Made to order. Inquire!
NEW! CUE LIGHT UPGRADE
For most older Wireless Cue Lights. 6 superbright white LEDs replace the power hungry incandescent lamp and an NIMH rechargeable battery pack replaces the 9 volt snap connect batteries providing long running time and quick recharge.
PHOTOFLASH SIMULATION INTERFACE
Shutter "open" signal from camera insures that when the unit is triggered the camera shutter will be open and the flash will be recorded on film every time. Click here to view the INSTRUCTIONS.
BURNOUT ALARM
Lamp burnout during stop motion animation can be expensive if the burnout is not detected quickly. The Burnout Alarm senses if a lamp circuit opens and alerts you with a loud audible alarm and high intensity red LED lamp. A remote output can indicate the burnout on a distant annunciator or send the alarm to the animation rig to prevent further operation until the problem is corrected. The sound can be switched off if desired. Many other uses. 2,000 watt max load. Click here to view the INSTRUCTIONS.ARCHITECTURAL FIRELIGHT GENERATOR
The standard configuration is in a ready to use enclosure with ac plug and socket. Designed primarily for theme parks, hotels, and the like, it is an excellent way for lighting designers in all industries to (available with adjustment knobs instead of the standard inset controls) demonstrate our realistic firelight simulation technology. Can also be used in theatrical lighting effects. The unit can be ordered in many different configurations including pigtails, conduit fittings, listed electrical box and others including bare PCB which consists of a low voltage controller board & solid state power control device with optional Phoenix plug for interface. Random fire effect is preprogrammed into a microcontroller and is VERY believeable. Onboard controls include dimmer, flicker speed, flicker depth, and flicker damping. Use with Chandeliers, wall sconces, spotlights, etc. for an exciting firelight look. Can be ordered with remote control unit and in multiple units prewired to in-wall enclosures. Easy to interface to from 12 to 250 volt AC lighting systems. Click here to view the bifold INSTRUCTION BOOKLET.
AUTO POWER DISCONNECT
Expensive electronic equipment needs more than surge suppressors and circuit breakers to insure against power line damage. When power fails, especially over a wide geographic area, there is a dangerous surge when that power is restored. This will often exceed the limits of the common surge suppressor. This device DISCONNECTS the equipment upon power failure, isolating the equipment from the power source until the reset button is pressed. Has line and load power indicators, 20 amp fuse. Click here to view the INSTRUCTIONS.
2K LIGHT ORGAN
A Single channel "color organ". Use as many of these single channel units as needed to add light response to any audio signal. 10K ohm audio input will accept sound from almost any source, tape, radio, PA system, etc. An input level control adjusts incoming sound level. The built-in bandpass filter allows adjustment of BOTH low frequency cutoff point AND high frequency cutoff point giving complete control over the desired band of frequencies that will actuate the connected lamps, up to 2,000 watts! Several units tuned differently create quite a display! Interface output DIRECTLY DRIVES OUR DIMMERS for as much lighting power as you want! Add this to your musical instruments and you have synchronized eye candy on stage! Click here to view the INSTRUCTIONS.
CONNECTOR GUARDS
Attaches to our single channel 2K devices and 3 channel devices including Shadowmaker to help prevent ground pin breakage and bent pins. Hardware and easy instructions included.KNOB ADAPTER KIT
Fits our older dimmers. Kit consists of a new skirtless knob and metal plate with graduated markings. Easily attached, no modification to the dimmer is required. If the knob breaks you can replace with any knob you like!
OPERATING INFO. LABELS
This durable Lexan label has effects listing and complete operating instructions. Available for Flicker 2 Digital, Shadowmaker and Wireless Cue Light; other models coming soon. Use on older units too.
